New Website Launched!
We recently replaced a shower cubicle with a new bath at a home in West Bridgford. The work involved removing the old shower tray and enclosure, reworking the pipework and fitting a new bath with panels, taps and a grab rail, all within the existing tiled bathroom.
The Starting Point
The bathroom had a corner shower cubicle with a white shower tray set on a tiled base, surrounded by beige wall tiles with a decorative border.
The tray edge and the tiles around its base had become worn, with gaps and chipped tiles along the front, and an electric shower was mounted on the wall above. Over time, worn edges like these can allow water to find its way behind the tray, which is another reason to replace an ageing cubicle.
Removing The Shower Cubicle
Our first job was to remove the shower enclosure and lift out the old tray. This exposed the floor beneath, including the openings where the old waste had run. We cleared the area back so we had a clean, open space to work with, ready for the new bath.
Pipework & Waste
With the recess clear, we ran new copper supply pipes along the floor to feed the bath taps, each fitted with an isolation valve so the water to the taps can be turned off easily. Using isolation valves is good practice, as it means a tap can be repaired or replaced without shutting off the water to the whole house. We also installed new waste pipework with a trap to connect the bath to the existing drainage.
Fitting The New Bath
The new bath is a modern, white rectangular design with clean, straight lines and chrome pillar taps. It sits on adjustable legs, which allow it to be set level and at the correct height against the tiled walls.
Before sealing, we filled the bath with water.
This is standard practice when fitting a new bath, as it allows us to check every connection for leaks and lets the bath settle under the weight of water, so the seal around the edge stays watertight once the bath is in use.
Panels & Finishing Touches
Once we were happy with the bath, we fitted the white front and end panels, which neatly conceal the legs and pipework.
A chrome grab rail was fitted to the wall beside the bath, giving a secure handhold when getting in and out. The existing electric shower remains in place above the bath, so the household can still enjoy a quick shower whenever they like.
The new bath sits comfortably between the tiled walls and the existing white vanity unit, and the beige tiles and decorative border were kept, so the room was transformed without the need for a full refit.
The Result
What was once a tired shower cubicle is now a clean, bright bath with a shower above, making the bathroom far more versatile for everyday use. The finished room looks fresh, tidy and ready to use.